Retropie Neo Geo Bios Location

I spent one year building an arcade machine. I found myself installing and reinstalling RetroPie on my Raspberry Pi a million times to get it right for the type of work I wanted to do. Every time I needed to reinstall, I had to reconfigure the entire system by following the same steps repeatedly.

Try searching for neogeo.zip on google. You should be able to find this zip file that contains the neo-geo bios. You can then place this in your bios directory (or in the rom zip itself) and the game should hopefully work. Dec 03, 2014 It's finally here for all you Neo Geo CD freaks. The Neo Geo is a cartridge-based arcade system board and home video game console released by SNK in 1990. Bbc sherlock season 1 sub thai. See also:, There are a variety of arcade emulators available in RetroPie which can emulate Neo Geo games. There are significant differences in performance, compatibility, and configuration between them. Neo Geo A+B+C (RetroPad B+A+Y) for BIOS Menu; Neo Geo B+C+D (RetroPad A+Y+X) for Test Menu; At any time. Neo Geo Start+A+B+C (RetroPad Start+B+A+Y) for In-Game Menu; The menus allow you to change various settings like region, dip switch settings for gameplay options like difficulty or blood, and coin or free play settings. Unibios settings will. It may be the BIOS that is wrong, not its location. There are several different versions floating around on the net. And although it's probably obvious, the ROMs should also be in the same folder, and both the games and the BIOS should remain zipped.

The reinstalling was mostly because of the lack of information about many setup choices you have to make if you want to get the most out of your Raspberry Pi.

Retropie Neo Geo Bios Locations

Installing RetroPie

The first step is burning the RetroPie image into the SD card.

Step 1. Identify which model of the Raspberry Pi you have.
Step 2. Connect a compatible SD card to your computer.
Step 3. Download and install the official Raspberry Pi Imager.
Step 4. On the Raspberry Pi Imager, go to Operating System → RetroPie and select the version that belongs to your Raspberry Pi model. Also, choose your SD card.

Games: SD card or external drive?

From here, you have two options: installing games into the SD card (efficient when your SD card is big enough) or installing them on an external drive (most ideal for small SD cards).

If you prefer to keep games and RetroPie on the same SD card, you can avoid the section 'Setting up the external USB Storage'.

To install games on an external USB drive, do not plug the SD card into the Raspberry Pi.

Step 5. Extract and reinsert the SD card into your computer.

You'll notice the SD card is now called boot.

Setting up the external USB Storage

Keeping the games (ROMs) and the saved games progresses in an external source makes it easier to experiment with RetroPie in the SD card, keeping the critical data safe in a plug-n-play source.

It's also a good option when you have a small SD card with enough space for no other thing than RetroPie.

Step 6. Format a USB drive as FAT. Use any disk utility available on your OS for it.
Step 7. Create a folder named retropie-mount on the root of the USB drive. It will be used by RetroPie every time you boot the system.

Find more info about this in the official RetroPie documentation.

Overclocking the Raspberry Pi

If you have an old model of Raspberry Pi or a Raspberry Pi Zero,it is recommendable to overclock your board. That way, you can run games that require more power. For example, a Raspberry Pi Model 1 and Zero can't run most of the Neo Geo or MS-DOS games, but an overclocked Pi can do it.

There are two ways to overclock a Raspberry Pi: the wrong one and the right one.

The wrong way lets you expand the core and memory as you wish, but it's dangerous to your board and voids the warranty.

Raspberry Pi provides an official way to do it right: Introducing Turbo Mode: up to 50% more performance for free.

I recommend you to do it in the right way:

Step 8. Edit the file /config.txt and add (or uncomment if it's already there):

Setting up an arcade controller

It took me a while to understand how to set up an arcade controller. Even though the documentation is right there, I didn't know the arcade controllers' name was Xin-Mo.

Step 9. Edit the file /cmdline.txt and write at the end:

There are a few more steps to configure the controller but wait until turning on the system.

HDMI sound

If you're using a computer monitor like me, it probably doesn't have built-in speakers. In some cases, this kind of monitor has a 3.5mm jack to output sound to external speakers. In that case, you may have to make that the HDMI takes control over the sound:

Step 10. Force the sound to go through HDMI by adding the following line to the file /config.txt:
Step 11. Increase the sound quality by updating the /retroarch.cfg file with:

The headphone jack's sound is a lot clearer with a lot less static using that configuration.

Now turn on the Raspberry Pi

Plug the SD card and the USB drive into the Raspberry Pi and turn it on. As it is the first time to run RetroPie, it will take some time to process.

The first screen to appear is to set up the controllers:

Setting up the controllers

Step 12. Set up each button of your controller. For an arcade machine (Xin-Mo controller), I recommend using the same distribution as the Sega Genesis controller. For any control that you don't need to set, keep pressing any key to choose -NOT DEFINED-.

You can change this later and also set up different controller distributions for individual consoles and games.

The A button becomes the Enter key, and the B button becomes Escape.

To set up the controller for the second player:

Step 13. Press Start to open the menu, then select Configure input, this time keeping any button of the second controller pressed.

Installing games

That was all related to the initial setup. Now it's all about games!

If you followed the steps to install games on the SD, follow the official documentation about all the possible ways to transfer ROMs.

To install games in the external USB drive and if you followed the steps detailed on Setting up the external USB Storage, then:

Step 14. Unplug the USB drive from the Raspberry Pi and plug it into your computer.

Now the folder /retropie-mount should have some folders inside:

ROMs

All the game ROMs must go inside the folder /retropie-mount/roms.

Step 15. Place the ROMs into its corresponding console folder. Avoid zip files because they are not supported.
Step 16. Plug the USB drive into the Raspberry Pi and wait until the drive's LED stops blinking.
Step 17. Reset EmulationStation going to Start (menu) → Quit → Restart EmulationStation

The ROMs are now on EmulationStation. You're going to see them in the main menu of RetroPie under the console name. Repeat steps 14-17 to add more ROMs.

Specific setups

Following the steps above, you'll have access to the most common consoles and games. But by following a few more steps, you can go beyond that.

Sega Megadrive/Genesis buttons

The Sega emulator recognizes only three buttons by default (Megadrive controller). In my case, I had installed six buttons in my arcade cabinet, so I activated all of the buttons (like a Genesis controller):

Launch a Megadrive/Genesis game and go to the RetroArch menu ('Select' + 'X').
Go to Quick Menu → Options and set the two input devices to six buttons pad.
Exit the RetroArch menu.

Neo Geo BIOS

This emulator works a little differently from the other ones. Before copying ROMs, you need to:

Get the Neo Geo BIOS: There is plenty of sites where you can find the neogeo.zip file you need.
Copy the zip file (compressed) to /retropie-mount/BIOS and /retropie-mount/roms/neogeo
Move ROMs as zip files (compressed) to /retropie-mount/roms/neogeo
Restart EmulationStation.

Note: Most of the games won't work the first time, but you can change the emulator for those specific games:

Open a game and press any key before it loads.
Go to Select emulator for ROM → lr-fba (or any other emulator) → Exit without launching.
Relaunch the game manually.
If the game still doesn't work, try the same steps with another version of the game.

Visit this complete video tutorial for more info: How to Set Up And Use NEOGEO Emulator Retropie Raspberry pi 1 2 3 and Zero.

MS-DOS emulator

Beyond this point, you'll need to use a keyboard.

Connect the Raspberry Pi to the Internet.
Go to the RetroPie settings: 'RetroPie' → 'Retropie setup'. The first time getting there can take several minutes.
Install DosBox: 'Manage packages' → 'manage optional packages' → 'dosbox' → 'install from binary'. It will take some time because it needs to download packages from the Internet.
When it ends, go back to the main menu, then restart the system: 'Perform reboot'.

Now MS-DOS is a console in the list of consoles. A new folder /retropie-mount/roms/pc will also be created automatically in the USB drive.

Visit this complete video tutorial for more info: Simple DOSBox Setup RetroPie MS-DOS Raspberry Pi.

MAME emulators

I had the worst experience trying to understand this platform. I recommend to play arcade games on Neo Geo or find a version of the games for a more common console. In case you choose to use MAME, this is what worked for me.

There are different versions of MAME that were launched in different years. So, for example, if you have the emulator for MAME 0.37b5, you must get games with the specific version 0.37b5. For some versions, the games are far more challenging to get than others. Another factor that determines which version you need is the Raspberry Pi model.

For Raspberry Pi Zero and 1, ROMs have to be version 0.37b5 (mame2000).
For Raspberry Pi 2, 3, 4, and 400, ROMs have to be version 0.78 (mame2003).

Then to copy ROMs:

Copy zip ROMs to the folder /ROMs/arcade.
Do not use folders specific for emulators, like /mame-xxxx.
Upload compressed (.zip) ROMs. Folders won't work.

The first time a game is running, it will ask for an emulator to run:

For Raspberry Pi Zero and Pi 1, choose mame4all (mame2000).
For Raspberry Pi 2, 3, 4 and 400, choose lr-mame2003 (mame2003).

And

That's all far I could go. I'll update this guide as I find more and better solutions.

Neogeo Bios For Retropie

Ok. I can play some emulators almost perfect (many nes, genesis, fba, pca emulators), but i havent managed to play any neo geo roms.
I have put both fba and neogeo roms in the same roms/fba folder along with the neogeo.zip. Only black screen appears. I know i have to change smth but i need instructions. Can someone help?
how ?!
i have the same problem plz ! :D
And do you know how tu use PS3 controller with USB on retromie for play with every emulators ?
i have agin this probleme i put mu bios neogeo in /home/pi/retropie/roms/neogeo and in /opt/retropie/emulators/gngeo-pi-0.85/gngeo
that’s right ?!
i do :
cd ~/RetroPie-Setup
sudo ./retropie_setup.sh
?
And have you edit any file for play in bluetooth with your controller ?
i will try and after i post if it’s work
it’ worst with this my MAME rom doesn’t work ! and i still can’t play with neo geo … T-T
My Neo geo emuator work but a lot of game doesn’t work it’s normal ?
Hi,
I Have the same problem.
Someone can publish a tutorial about MAME and NEOGEO?
Thanks!
Hi,
I had the same problem. You really need the right roms for the provided .drv files.(and bios)
Look for this pack
FB_Alpha_v0.2.97.08_Neo_Geo_ROM_Collection_(NeoGeo_ROMs)_by_Lovok
Worked great for me.
Hello,
Please, could you tell me where to find the bios file neogeo? (neogeo.zip)
I have one version of this file ( +-250k) but it doesn’t work with all roms. For example, metal slug 3 is not compatible with this bios version…
Thanks in advance for your help!
Does this help?
I am having issues with FBA NeoGeo games all of a sudden. Alot of my games didn’t work because of the wrong file so I updated them via clrmamepro. Now they work yet they don’t. The graphics are all screwed up. Lines in them, missing sprite’s, etc. Even the opening startup screen that has the big NeoGeo logo on the white background is missing. Just the white background and the sound is still good to go. What is strange is even if I replace the files with an older copy that I know worked before, I still get the same thing. Anyone had this issue or have any suggestions? I thought maybe the BIOS got corrupted so I replaced it but that gave me no joy.
I would be sorely tempted to download the set that profitwarning mentins above. It seems FBA is happiest with sets geared for portable devices. As I’m no mame / fba set expert I download the correct set rather than convert them.
Maybe we could keep track of what works here:
http://www.petrockblock.com/forums/topic/mame-romset-versions/
hey, i have many problems, i’m a new user linux.
can you help me?
1- When i execute a rom in Emulation Station -> NEO-GEO, some files load (.bin files) and appears the black screen, the game don’t run.
2- My neogeo bios file (neogeo.zip) are pasted in “home/pi/RetroPie/roms”, but i can’t access “opt/retropie/emulators/gngeo-pi-0.85/gngeo” through XFCE.
3- my folder “opt/retropie/emulators/gngeo-pi-0.85/gngeo” don’t exist, but exist a similar folder (“opt/retropie/emulators/gngeopi/neogeobios”)
Information:
RaspBerry Pi B
Pipplware 4.0
Likelihood is you are lacking the correct romset. see these posts:
If I were you I would use PiFBA to play neogeo roms.
I tried use PiFBA too, i copied the roms files to home/pi/RetroPie/roms/fba, and appears the same error:
some files load (.bin files) and appears the black screen, the game don’t run
I don’t found any BIOS file to fba, i need a BIOS file?
the error can be the rooms files?
the load screen show:Final Burn Alpha
For neo geo games you need the neogeo.zip file in the same folder as your ROMs. What is required is laid out clearly in the aforementioned posts. Floob has some videos on it as well. The answers are all on the forum, a little searching will get you what you need.
Posts